Extra Benefits Accompanied

　　 TANK CLEANING COST ELIMINATED

Owing to keeping high temperature pre-heating is no longer required, sludge build-up at the bottom of the tank and pipeline could be eliminated, and tank cleaning and maintenance cost could be eliminated .

Because pre-heating temperature to the fuel could be minimized, heating power consumption could be reduced, it refers that operation cost of furnace/burner could be reduced.

Due to oil droplet is extremely small, and blockage of the pipe line and the nozzle ejector could be prevented, it refers to that mechanical lifespan of the burner or the combustion engine could be extended.

　　 CORROSIVE OF THE SYSTEM COUKLD BE MINIMIZED

Usually, remaining of the water in heavy fuel oil will be approx 0.5 ~2%, and it will cause rust problem to the fuel combustion system including pipe line and combustion chamber. But now, with GFOP process, fuel with the water remaining is totally homogenized, and water then would be wrapped within the oil molecular, this will facilitate lowering corrosive problem to the whole system.

GFOP is very friendly equipment to the users. With 3 different selectable access is equipped, the user could choose different fuels on line by changing the path to prepare different type of fuel on-line, such as energy saving and low emission green fuel, or emulsified heavy oil with water but without additive prepared, or just using fuel oil without any additive.

　　 REVENUE OF INVESTMENT

Revenue expectation usually should be depending on quantity of energy saving and low emission fuel oil is used, nevertheless, revenue usually could be made within 1 (one) year.

1. Revenue made within at least 12(twelve) months depending on the fuel as equal flow rate.
2. Revenue made within at least 20(twenty) months depending on the fuel as equal calorific value
P.S. Above was depended on 13.5% additive of FDA200